The NDI Protocol class provides building and parsing of command strings and answers to and from a NDI tracking device. More...

#include <mitkNDIProtocol.h>

Inheritance diagram for mitk::NDIProtocol:

[legend]

Collaboration diagram for mitk::NDIProtocol:

[legend]

Public Types
typedef mitk::SerialCommunication::PortNumber	PortNumber
	Port number of the serial connection. More...

typedef mitk::SerialCommunication::BaudRate	BaudRate
	Baud rate of the serial connection. More...

typedef mitk::SerialCommunication::DataBits	DataBits
	Number of data bits used in the serial connection. More...

typedef mitk::SerialCommunication::Parity	Parity
	Parity mode used in the serial connection. More...

typedef mitk::SerialCommunication::StopBits	StopBits
	Number of stop bits used in the serial connection. More...

typedef mitk::SerialCommunication::HardwareHandshake	HardwareHandshake
	Hardware handshake mode of the serial connection. More...

typedef mitk::NDIPassiveTool::TrackingPriority	TrackingPriority
	Tracking priority used for tracking a tool. More...

Public Member Functions
	mitkClassMacroItkParent (NDIProtocol, itk::Object)

Pointer	Clone () const

virtual void	SetTrackingDevice (NDITrackingDevice *_arg)

NDIErrorCode	APIREV (std::string *revision)
	Gives information about the tool which is assosiated with the port handle. Writes portInfo to the string. More...

NDIErrorCode	PHINF (std::string portHandle, std::string *portInfo)

NDIErrorCode	PSOUT (std::string portHandle, std::string state)
	Set GPIO Output (Aurora) More...

NDIErrorCode	COMM (mitk::SerialCommunication::BaudRate baudRate, mitk::SerialCommunication::DataBits dataBits, mitk::SerialCommunication::Parity parity, mitk::SerialCommunication::StopBits stopBits, mitk::SerialCommunication::HardwareHandshake hardwareHandshake)
	Change Serial Communication Parameters. More...

NDIErrorCode	INIT ()
	Initialize the Measurement System. More...

NDIErrorCode	DSTART ()
	Start the Diagnostic Mode. More...

NDIErrorCode	DSTOP ()
	Stop the Diagnostic Mode. More...

NDIErrorCode	IRINIT ()
	Initialize the System to Check for Infrared. More...

NDIErrorCode	IRCHK (bool *IRdetected)
	This version of IRCHK uses only the simple "presence of infrared light" call, that returns a binary "IR detected/no IR detected" answer. More...

NDIErrorCode	PHSR (PHSRQueryType queryType, std::string *portHandles)
	Port Handle Search. Will write returned port handles to the string portHandles. More...

NDIErrorCode	PHF (std::string *portHandle)
	Port Handle Free. Frees the port handle. More...

NDIErrorCode	PHRQ (std::string *portHandle)
	Port Handle Request. Will request a Port Handle for a wireless tool and return it in the string portHandle. More...

NDIErrorCode	PVWR (std::string portHandle, const unsigned char sromData, unsigned int sromDataLength)
	Port Virtual Write. Writes an SROM Image data to a tool. More...

NDIErrorCode	PINIT (std::string *portHandle)
	Port Initialize. Will initialize a Port that has been acquired with PHRQ and has been assigned a SROM File with PVWR. More...

NDIErrorCode	PENA (std::string *portHandle, TrackingPriority prio)
	Port Enable. Will enable a port that has been initialized with PINIT. More...

NDIErrorCode	PDIS (std::string *portHandle)
	Port Disable. Will disable a port that has been enabled with PENA. More...

NDIErrorCode	IRATE (IlluminationActivationRate rate)
	Setting the illuminator rate. Will set the refresh rate for the illuminator for wireless tools. More...

NDIErrorCode	BEEP (unsigned char count)
	Sounding the measurement system beeper. The tracking system will beep one to nine times. More...

NDIErrorCode	SFLIST (std::string *info)
	Returns information about the supported feature of the tracking system. More...

NDIErrorCode	TSTART (bool resetFrameCounter=false)
	Start Tracking Mode. The tracking system must be in setup mode and must be initialized. More...

NDIErrorCode	TSTOP ()
	Stop Tracking Mode. The tracking system must be in Tracking mode. More...

NDIErrorCode	TX (bool trackIndividualMarkers=false, MarkerPointContainerType *markerPositions=nullptr)
	Report transformations in text mode. Optionally, individual markers can be tracked. More...

NDIErrorCode	BX ()
	Report transformations in binary mode. More...

NDIErrorCode	POS3D (MarkerPointContainerType *markerPositions)
	Report 3D Positions of single markers. can only be used in diagnostics mode. More...

NDIErrorCode	VER (mitk::TrackingDeviceType &t)
	returns if the tracking device is a Polaris or an Aurora system More...

NDIErrorCode	VSEL (mitk::TrackingDeviceData deviceData)
	Sets the tracking volume to the given type. Check available tracking volumes with SFLIST first. More...

NDIErrorCode	TX1000 (MarkerPointContainerType *markerPositions)
	Report transformations in text mode. More...

unsigned int	ByteToNbBitsOn (char &c) const

virtual bool	GetUseCRC () const

virtual void	SetUseCRC (bool _arg)
	Get whether to append a CRC16 checksum to each message. More...

virtual void	UseCRCOn ()
	Set whether to append a CRC16 checksum to each message. More...

virtual void	UseCRCOff ()

Static Public Member Functions
static Pointer	New ()

Protected Member Functions
	NDIProtocol ()
	Set whether to append a CRC16 checksum to each message. More...

	~NDIProtocol () override

NDIErrorCode	ParseOkayError ()

NDIErrorCode	GenericCommand (const std::string command, const std::string *parameter=nullptr)

NDIErrorCode	GetErrorCode (const std::string *input)
	returns the error code for an Error String returned from the NDI tracking device More...

Protected Attributes
NDITrackingDevice *	m_TrackingDevice
	tracking device to which the commands will be send More...

bool	m_UseCRC
	whether to append a CRC16 checksum to each message More...

Detailed Description

The NDI Protocol class provides building and parsing of command strings and answers to and from a NDI tracking device.

Documentation

Definition at line 86 of file mitkNDIProtocol.h.

Member Typedef Documentation

◆ BaudRate

typedef mitk::SerialCommunication::BaudRate mitk::NDIProtocol::BaudRate

Baud rate of the serial connection.

Definition at line 95 of file mitkNDIProtocol.h.

◆ DataBits

typedef mitk::SerialCommunication::DataBits mitk::NDIProtocol::DataBits

Number of data bits used in the serial connection.

Definition at line 96 of file mitkNDIProtocol.h.

◆ HardwareHandshake

typedef mitk::SerialCommunication::HardwareHandshake mitk::NDIProtocol::HardwareHandshake

Hardware handshake mode of the serial connection.

Definition at line 99 of file mitkNDIProtocol.h.

◆ Parity

typedef mitk::SerialCommunication::Parity mitk::NDIProtocol::Parity

Parity mode used in the serial connection.

Definition at line 97 of file mitkNDIProtocol.h.

◆ PortNumber

typedef mitk::SerialCommunication::PortNumber mitk::NDIProtocol::PortNumber

Port number of the serial connection.

Definition at line 92 of file mitkNDIProtocol.h.

◆ StopBits

typedef mitk::SerialCommunication::StopBits mitk::NDIProtocol::StopBits

Number of stop bits used in the serial connection.

Definition at line 98 of file mitkNDIProtocol.h.

◆ TrackingPriority

typedef mitk::NDIPassiveTool::TrackingPriority mitk::NDIProtocol::TrackingPriority

Tracking priority used for tracking a tool.

Definition at line 100 of file mitkNDIProtocol.h.

Constructor & Destructor Documentation

◆ NDIProtocol()

mitk::NDIProtocol::NDIProtocol ( )

protected

Set whether to append a CRC16 checksum to each message.

◆ ~NDIProtocol()

mitk::NDIProtocol::~NDIProtocol ( )

overrideprotected

Member Function Documentation

◆ APIREV()

NDIErrorCode mitk::NDIProtocol::APIREV ( std::string * revision )

Gives information about the tool which is assosiated with the port handle. Writes portInfo to the string.

◆ BEEP()

NDIErrorCode mitk::NDIProtocol::BEEP ( unsigned char count )

Sounding the measurement system beeper. The tracking system will beep one to nine times.

◆ BX()

NDIErrorCode mitk::NDIProtocol::BX ( )

Report transformations in binary mode.

◆ ByteToNbBitsOn()

unsigned int mitk::NDIProtocol::ByteToNbBitsOn ( char & c ) const

◆ Clone()

Pointer mitk::NDIProtocol::Clone ( ) const

◆ COMM()

NDIErrorCode mitk::NDIProtocol::COMM	(	mitk::SerialCommunication::BaudRate	baudRate,
		mitk::SerialCommunication::DataBits	dataBits,
		mitk::SerialCommunication::Parity	parity,
		mitk::SerialCommunication::StopBits	stopBits,
		mitk::SerialCommunication::HardwareHandshake	hardwareHandshake
	)

Change Serial Communication Parameters.

◆ DSTART()

NDIErrorCode mitk::NDIProtocol::DSTART ( )

Start the Diagnostic Mode.

◆ DSTOP()

NDIErrorCode mitk::NDIProtocol::DSTOP ( )

Stop the Diagnostic Mode.

◆ GenericCommand()

NDIErrorCode mitk::NDIProtocol::GenericCommand	(	const std::string	command,
		const std::string *	parameter = `nullptr`
	)

protected

Documentation Sends the command command to the tracking system and checks for OKAY and ERROR as replies This is used by commands like INIT, DSTART, DSTOP,... that do not need parameters or special parsing of replies

◆ GetErrorCode()

NDIErrorCode mitk::NDIProtocol::GetErrorCode ( const std::string * input )

protected

returns the error code for an Error String returned from the NDI tracking device

Documentation

◆ GetUseCRC()

virtual bool mitk::NDIProtocol::GetUseCRC ( ) const

virtual

◆ INIT()

NDIErrorCode mitk::NDIProtocol::INIT ( )

Initialize the Measurement System.

◆ IRATE()

NDIErrorCode mitk::NDIProtocol::IRATE ( IlluminationActivationRate rate )

Setting the illuminator rate. Will set the refresh rate for the illuminator for wireless tools.

◆ IRCHK()

NDIErrorCode mitk::NDIProtocol::IRCHK ( bool * IRdetected )

This version of IRCHK uses only the simple "presence of infrared light" call, that returns a binary "IR detected/no IR detected" answer.

◆ IRINIT()

NDIErrorCode mitk::NDIProtocol::IRINIT ( )

Initialize the System to Check for Infrared.

◆ mitkClassMacroItkParent()

mitk::NDIProtocol::mitkClassMacroItkParent	(	NDIProtocol	,
		itk::Object
	)

◆ New()

static Pointer mitk::NDIProtocol::New ( )

static

◆ ParseOkayError()

NDIErrorCode mitk::NDIProtocol::ParseOkayError ( )

protected

Documentation Reads the reply from the tracking device and checks if it is either "OKAY" or "ERROR##". if it reads an error, it returns the equivalent NDIErrorCode Replies other than OKAY or ERROR result in an NDIUNEXPECTEDREPLY

◆ PDIS()

NDIErrorCode mitk::NDIProtocol::PDIS ( std::string * portHandle )

Port Disable. Will disable a port that has been enabled with PENA.

◆ PENA()

NDIErrorCode mitk::NDIProtocol::PENA	(	std::string *	portHandle,
		TrackingPriority	prio
	)

Port Enable. Will enable a port that has been initialized with PINIT.

◆ PHF()

NDIErrorCode mitk::NDIProtocol::PHF ( std::string * portHandle )

Port Handle Free. Frees the port handle.

◆ PHINF()

NDIErrorCode mitk::NDIProtocol::PHINF	(	std::string	portHandle,
		std::string *	portInfo
	)

◆ PHRQ()

NDIErrorCode mitk::NDIProtocol::PHRQ ( std::string * portHandle )

Port Handle Request. Will request a Port Handle for a wireless tool and return it in the string portHandle.

◆ PHSR()

NDIErrorCode mitk::NDIProtocol::PHSR	(	PHSRQueryType	queryType,
		std::string *	portHandles
	)

Port Handle Search. Will write returned port handles to the string portHandles.

◆ PINIT()

NDIErrorCode mitk::NDIProtocol::PINIT ( std::string * portHandle )

Port Initialize. Will initialize a Port that has been acquired with PHRQ and has been assigned a SROM File with PVWR.

◆ POS3D()

NDIErrorCode mitk::NDIProtocol::POS3D ( MarkerPointContainerType * markerPositions )

Report 3D Positions of single markers. can only be used in diagnostics mode.

◆ PSOUT()

NDIErrorCode mitk::NDIProtocol::PSOUT	(	std::string	portHandle,
		std::string	state
	)

Set GPIO Output (Aurora)

◆ PVWR()

NDIErrorCode mitk::NDIProtocol::PVWR	(	std::string *	portHandle,
		const unsigned char *	sromData,
		unsigned int	sromDataLength
	)

Port Virtual Write. Writes an SROM Image data to a tool.

◆ SetTrackingDevice()

virtual void mitk::NDIProtocol::SetTrackingDevice ( NDITrackingDevice * _arg )

virtual

◆ SetUseCRC()

virtual void mitk::NDIProtocol::SetUseCRC ( bool _arg )

virtual

Get whether to append a CRC16 checksum to each message.

◆ SFLIST()

NDIErrorCode mitk::NDIProtocol::SFLIST ( std::string * info )

Returns information about the supported feature of the tracking system.

◆ TSTART()

NDIErrorCode mitk::NDIProtocol::TSTART ( bool resetFrameCounter = false )

Start Tracking Mode. The tracking system must be in setup mode and must be initialized.

◆ TSTOP()

NDIErrorCode mitk::NDIProtocol::TSTOP ( )

Stop Tracking Mode. The tracking system must be in Tracking mode.

◆ TX()

NDIErrorCode mitk::NDIProtocol::TX	(	bool	trackIndividualMarkers = `false`,
		MarkerPointContainerType *	markerPositions = `nullptr`
	)

Report transformations in text mode. Optionally, individual markers can be tracked.

◆ TX1000()

NDIErrorCode mitk::NDIProtocol::TX1000 ( MarkerPointContainerType * markerPositions )

Report transformations in text mode.

◆ UseCRCOff()

virtual void mitk::NDIProtocol::UseCRCOff ( )

virtual

◆ UseCRCOn()

virtual void mitk::NDIProtocol::UseCRCOn ( )

virtual

Set whether to append a CRC16 checksum to each message.

◆ VER()

NDIErrorCode mitk::NDIProtocol::VER ( mitk::TrackingDeviceType & t )

returns if the tracking device is a Polaris or an Aurora system

◆ VSEL()

NDIErrorCode mitk::NDIProtocol::VSEL ( mitk::TrackingDeviceData deviceData )

Sets the tracking volume to the given type. Check available tracking volumes with SFLIST first.

Member Data Documentation

◆ m_TrackingDevice

NDITrackingDevice* mitk::NDIProtocol::m_TrackingDevice

protected

tracking device to which the commands will be send

Definition at line 158 of file mitkNDIProtocol.h.

◆ m_UseCRC

bool mitk::NDIProtocol::m_UseCRC

protected

whether to append a CRC16 checksum to each message

Definition at line 159 of file mitkNDIProtocol.h.

The documentation for this class was generated from the following file:

mitkNDIProtocol.h

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Member Typedef Documentation

◆ BaudRate

◆ DataBits

◆ HardwareHandshake

◆ Parity

◆ PortNumber

◆ StopBits

◆ TrackingPriority

Constructor & Destructor Documentation

◆ NDIProtocol()

◆ ~NDIProtocol()

Member Function Documentation

◆ APIREV()

◆ BEEP()

◆ BX()

◆ ByteToNbBitsOn()

◆ Clone()

◆ COMM()

◆ DSTART()

◆ DSTOP()

◆ GenericCommand()

◆ GetErrorCode()

◆ GetUseCRC()

◆ INIT()

◆ IRATE()

◆ IRCHK()

◆ IRINIT()

◆ mitkClassMacroItkParent()

◆ New()

◆ ParseOkayError()

◆ PDIS()

◆ PENA()

◆ PHF()

◆ PHINF()

◆ PHRQ()

◆ PHSR()

◆ PINIT()

◆ POS3D()

◆ PSOUT()

◆ PVWR()

◆ SetTrackingDevice()

◆ SetUseCRC()

◆ SFLIST()

◆ TSTART()

◆ TSTOP()

◆ TX()

◆ TX1000()

◆ UseCRCOff()

◆ UseCRCOn()

◆ VER()

◆ VSEL()

Member Data Documentation

◆ m_TrackingDevice

◆ m_UseCRC